typeset aspect=""
typeset SCALE=""
typeset CROP=""
-typeset profile="xvidvhq"
+typeset profile="xvidhq"
typeset extension=""
typeset mailto=""
typeset encoder=""
typeset default_alang="en"
+typeset track=""
typeset -i default_aid=128
typeset -i aid_override=-1
typeset -i force_onepass_mode=0
##############################################################################################
# Command line processing
##############################################################################################
-while (($#)) && getopts 162mvifkzx:ht:n:d:b:s:t:a:p:e:j:l: opt "$@"
+while (($#)) && getopts 162wmvifkzx:ht:n:d:b:s:t:a:p:e:j:l: opt "$@"
do
case $opt in
(n) dvdname=$OPTARG;;
(x) extension=$OPTARG;;
(j) eject_disk=$OPTARG;;
(l) aid_override=$OPTARG;;
- (w) set -$opt;;
+ (w) set -x;;
(h) show_usage=1;;
(:) echo >&2 "$0: $OPTARG requires a value"; errors=errors+1;;
(\?) echo >&2 "$0: invalid option '$OPTARG'"; errors=errors+1;;
echo >&2 " 5) If dvdname is a full path to a VOB file, it will be ripped as a DVD instead of $dev"
echo >&2 " -p <profile> Specify which encoding profile to use in -x mode as shown below:"
echo >&2 " Mencoder and Handbrake Encoder Profiles:"
- echo >&2 " - xvidvhq = AVI, very high quality encoding, Xvid codec, 2 pass encoding (default)"
- echo >&2 " - xvidhq = AVI, high quality encoding, Xvid codec, 2 pass encoding"
+ echo >&2 " - xvidvhq = AVI, very high quality encoding, Xvid codec, 2 pass encoding"
+ echo >&2 " - xvidhq = AVI, high quality encoding, Xvid codec, 2 pass encoding (default)"
echo >&2 " - xvid = AVI, fast encoding, Xvid codec, 2 pass encoding"
echo >&2 " - iphone = MP4, x264 codec, 2 pass encoding, forced 480:320 scaling"
echo >&2 " - ipod = MP4, x264 codec, 2 pass encoding, forced 320:240 scaling"
echo >&2 " -f Make the final image a DVD folder"
echo >&2 " -z Make the final image a compressed file based on your profile selection and encoder"
echo >&2 " -e <encoder> Specify the encoder to use to make the compressed file (valid encoders=mencoder|handbrake) (default=handbrake if found)"
- echo >&2 " You must also specify the target size or bitrate using the '-s' or '-b' options"
+ echo >&2 " You must also specify the target size or bitrate using the '-s' or '-b' options with xvid profiles"
echo >&2 " -s <size> Set the target size of the compressed file in MB (ex: 700, 1000, etc)"
echo >&2 " -b <bitrate> Set the bitrate desired in the compressed file in kbits/sec (ex: 1500, 2000 (default), etc)"
echo >&2 " -a <W:H> Specify the width x height aspect ratio to scale the DVD to (only used in -x mode)"
encoder="mencoder"; # If we can't find handbrake, set mencoder as the default
[[ -x `which $handbrake_xvid` ]] && [[ "$profile" =~ "xvid" ]] && encoder="handbrake";
[[ -x `which $handbrake_mp4` ]] && [[ "$profile" =~ "mp4" ]] && encoder="handbrake";
+ [[ -x `which $handbrake_mp4` ]] && [[ "$profile" =~ "ip" ]] && encoder="handbrake";
[[ -x `which $handbrake_mp4` ]] && [[ "$profile" =~ "hb" ]] && encoder="handbrake";
fi
[[ ! -x `which mkisofs` ]] && echo "-E- missing dependency: mkisofs" && exit
[[ "$encoder" == "handbrake" ]] && [[ "$profile" =~ "xvid" ]] && [[ ! -x `which $handbrake_xvid` ]] && echo "-E- missing encoder: $handbrake_xvid" && exit
[[ "$encoder" == "handbrake" ]] && [[ "$profile" =~ "mp4" ]] && [[ ! -x `which $handbrake_mp4` ]] && echo "-E- missing encoder: $handbrake_mp4" && exit
+[[ "$encoder" == "handbrake" ]] && [[ "$profile" =~ "ip" ]] && [[ ! -x `which $handbrake_mp4` ]] && echo "-E- missing encoder: $handbrake_mp4" && exit
[[ "$encoder" == "handbrake" ]] && [[ "$profile" =~ "hb" ]] && [[ ! -x `which $handbrake_mp4` ]] && echo "-E- missing encoder: $handbrake_mp4" && exit
+[[ "$encoder" == "handbrake" ]] && [[ ! -x `which ffmpeg` ]] && echo "-E- missing dependency: ffmpeg" && exit
##############################################################################################
typeset handbrake_video_encoder_opts=""
typeset filetype=""
typeset handbrake_audio_opts=""
+ typeset hb_profile=""
# Set a variable that we will use later to determine if we found a handler for $profile or not
typeset -i found_profile=0
PASSES=""
fi
+ # get our audio track from the VOB file (requires mp4 version of handbrake to extract)
+ get_audio_track_from_vob "$vobfile" "$handbrake_mp4"
+
# XVID profile
if [[ "$profile" =~ "xvid" ]]; then
found_profile=1
if [ "$profile" == "xvidvhq" ]; then
handbrake_opts[0]="-f avi"
handbrake_opts[1]="-b $target_bitrate"
- handbrake_opts[2]="-e ffmpeg"
+ handbrake_opts[2]="-e xvid"
handbrake_opts[3]="-T"
handbrake_opts[4]="-5"
handbrake_opts[5]="-8"
# extract the HandBrake Profile name from $profile
hb_profile=`echo "$profile" | sed 's/hb_//g' | sed 's/_/ /g'`
- handbrake_opts[0]="-Z \"$hb_profile\""
fi
# Make sure we found a handler for the given profile
# setup our audio option
if [ $audio_2ch -eq 1 ] && [ $audio_6ch -eq 1 ]; then
- handbrake_audio_opts="-E faac,ac3 -6 dpl2,6ch"
+ handbrake_audio_opts="-E faac,ac3 -6 dpl2,auto"
fi
- if [ $audio_6ch -eq 1 ]; then
- handbrake_audio_opts="-E ac3 -6 6ch"
+ if [ $audio_6ch -eq 1 ] && [ $audio_2ch -eq 0 ]; then
+ handbrake_audio_opts="-E ac3 -6 auto"
fi
- if [ $audio_2ch -eq 1 ]; then
+ if [ $audio_2ch -eq 1 ] && [ $audio_6ch -eq 0 ]; then
handbrake_audio_opts="-E faac -6 dpl2"
fi
+ if [ -n "$track" ]; then
+ handbrake_audio_opts="$handbrake_audio_opts -a $track"
+ fi
# Convert our array of opts into a string
for OPTS in "${video_encoder_opts[@]}"; do
done
# Execute the handbrake command to encode the video
- echo -e "\n Encoding: $handbrake_cli -i \"$vobfile\" -o \"$final_output_file\" $handbrake_cmd_line_opts $handbrake_audio_opts $handbrake_video_encoder_opts $PASSES >> $encodelog 2>&1" >> "$logfile"
- $handbrake_cli -i "$vobfile" -o "$final_output_file" $handbrake_cmd_line_opts $handbrake_audio_opts $handbrake_video_encoder_opts $PASSES >> $encodelog 2>&1
- handbrake_retval=$?
+ if [ -n "$hb_profile" ]; then
+ echo -e "\n Encoding: $handbrake_cli -i \"$vobfile\" -o \"$final_output_file\" -Z \"$hb_profile\" $handbrake_cmd_line_opts $handbrake_audio_opts $handbrake_video_encoder_opts $PASSES >> $encodelog 2>&1" >> "$logfile"
+ $handbrake_cli -i "$vobfile" -o "$final_output_file" -Z "$hb_profile" $handbrake_cmd_line_opts $handbrake_audio_opts $handbrake_video_encoder_opts $PASSES >> $encodelog 2>&1
+ handbrake_retval=$?
+ else
+ echo -e "\n Encoding: $handbrake_cli -i \"$vobfile\" -o \"$final_output_file\" $handbrake_cmd_line_opts $handbrake_audio_opts $handbrake_video_encoder_opts $PASSES >> $encodelog 2>&1" >> "$logfile"
+ $handbrake_cli -i "$vobfile" -o "$final_output_file" $handbrake_cmd_line_opts $handbrake_audio_opts $handbrake_video_encoder_opts $PASSES >> $encodelog 2>&1
+ handbrake_retval=$?
+ fi
if [ $handbrake_retval != 0 ]; then
fatal_and_exit "-E- Unhandled handbrake error"
fi
# Concatenate the encode log to our main log file, greping out unwanted lines
- cat $encodelog | grep -v "Encoding" >> "$logfile"
+ cat $encodelog | grep -v "Encoding:" | grep -v "hb_demux_ps" >> "$logfile"
cat $encodelog | grep "Encoding:" | sed 's/\r/\n/g' | grep "Encoding:" | grep "ETA" | head -1 >> "$logfile"
cat $encodelog | grep "Encoding:" | sed 's/\r/\n/g' | grep "Encoding:" | grep "ETA" | tail -1 >> "$logfile"
}
echo " Setting mencoder crop filter to: $CROP"
}
+function get_audio_track_from_vob {
+ # Adjust our audio ID to find the english audio stream
+ # This should be 128. However, if 128 is not there, pick the next one that incrementally is.
+ vob="$1"
+ handbrake_cli="$2"
+ aidcheck=`tempfile`
+ aid=$default_aid
+ alang=$default_alang
+ if [ $aid_override -lt 0 ]; then
+ mplayer -v -endpos 0 "$vob" > $aidcheck 2>&1
+ grep -q "Found audio stream: $aid" $aidcheck
+ while [ $? == 1 ] && [ $aid -lt 159 ]; do
+ (( aid = aid + 1 ))
+ grep -q "Found audio stream: $aid" $aidcheck
+ done
+ [[ -e "$aidcheck" ]] && rm -f "$aidcheck"
+ else
+ aid=$aid_override
+ fi
+ # Now that we've found the right audio id, find the corresponding audio track in HandBrake
+
+ # convert the aid we found into hex
+ aid_hex=`echo "obase=16; $aid" | bc`
+
+ # extract the audio streams in the vob
+ #ffmpeg -i "$vob" > $aidcheck 2>&1
+ $handbrake_cli --stop-at 0 -i "$vob" -o /dev/null -v 100 > $aidcheck 2>&1
+
+ # find the stream that matches our aid
+ #stream=`grep "Stream.*\[0x$aid_hex\]" $aidcheck`
+ stream=`grep "scan: audio" $aidcheck | grep -n "" | grep "scan: audio 0x$aid_hex"`
+
+ # extract the track number that handbrake uses
+ #track=`expr match "$stream" '.*#[0-9]\.\([0-9]*\)'`
+ track=`expr match "$stream" '^\([0-9]*\):'`
+
+ if [ -n "$track" ]; then
+ echo "-> Setting the audio ID to $aid. Setting the audio track to $track." | tee -a "$logfile"
+ fi
+}
+
function get_audio_id_from_vob {
# Adjust our audio ID to find the english audio stream
# This should be 128. However, if 128 is not there, pick the next one that incrementally is.
projects / rip_dvd / .git / blobdiff